2003 BMW M3 2DR CONVERTIBLE
Security
Battery RED/GREEN (+) IGNITION SWITCH HARNESS
Ignition GREEN (+) IGNITION SWITCH HARNESS
Starter01 BLACK/BLUE (+) IGNITION SWITCH HARNESS
AllDoorTrigger BROWN/GRAY (-) AT ANTI-THEFT UNDER PASS. FLOORBOARD
TrunkTrigger WHITE/BROWN (-) IN HARNESS IN DRIVERS KICKPANEL
HoodTrigger VIOLET/GREEN (-) AT MODULE BEHIND GLOVEBOX
ParkingLights RIBBON CABLE (+) AT VEHICLE LIGHT SWITCH
Remote Start
Battery RED/GREEN (+) IGNITION SWITCH HARNESS
Ignition GREEN (+) IGNITION SWITCH HARNESS
Ignition02 VIOLET (+) IGNITION SWITCH HARNESS
Accessory01 VIOLET (+) IGNITION SWITCH HARNESS
Starter01 BLACK/BLUE (+) IGNITION SWITCH HARNESS
AntiTheftType EWS II
AntiTheftSystem AN RF SIGNAL ACTIVATED SYSTEM
KeySense RED (-) IGNITION SWITCH HARNESS
Tach BLACK (-) ROUND BLACK PLUG ON PASSENGER SIDE FIREWALL
SpeedSense WHITE/BLUE (AC) IN HARNESS FROM GAUGES
ParkingLights RIBBON CABLE (+) AT VEHICLE LIGHT SWITCH
BrakeLights BROWN/WHITE (+) AT SWITCH ABOVE BRAKE PEDAL
ReverseLights BLUE/RED (+) IN HARNESS AT LIGHT
Doorlocks / Window
PowerUnLock BLUE/RED (-) AT MODULE BEHIND GLOVEBOX - PIN #36
PowerLock WHITE/BLACK (-) AT MODULE BEHIND GLOVEBOX - PIN #34
Convenience
HeadLights YELLOW (+) AT VEHICLE LIGHT SWITCH
LowSpeedWipers BLACK/GRAY (-) IGNITION SWITCH HARNESS
TrunkRelease GRAY/RED (-) AT TRUNK RELEASE SWITCH
Mobile Audio / Video
Battery RED/GREEN (+) IGNITION SWITCH HARNESS
Accessory01 VIOLET (+) IGNITION SWITCH HARNESS
Ground BROWN (-) RADIO HARNESS
PowerAntenna WHITE (+) RADIO HARNESS
FrontLeftSpeakerPos YELLOW/RED
FrontLeftSpeakerNeg BROWN/ORANGE
FrontRightSpeakerPos BLACK/RED
FrontRightSpeakerNeg BROWN/ORANGE
RearLeftSpeakerPos YELLOW/BLACK
RearLeftSpeakerNeg BLACK/ORANGE
RearRightSpeakerPos BLUE/BLACK
RearRightSpeakerNeg BROWN/ORANGE
Control Modules
Note:
Wirediagram.com makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Wirediagram.com disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
